Specially designed billets of AISI 304L stainless steel were forged at two temperatures, 843 °C and 941 °C, and with varying transfer times. The machined 304L billets were thick near the center (51 mm) and thin near the periphery (10 mm) such that forging with a flat platen resulted in regions of high strain (center) and low strain (periphery).
The degradation of materials involving corrosion in handling nitric acid in the spent fuel nuclear reprocessing plant is a serious issue. In the present work, the corrosion resistance of American Iron and Steel Institute (AISI) type 304L stainless steel (SS) and nitric acid grade (NAG) type 310L SS in 1 to 11.5 M HNO3 and boiling 15.65 M …
Abstract. Specially designed billets of AISI 304L stainless steel were forged at two temperatures, 843 °C and 941 °C, and with varying transfer times. The machined 304L billets were thick near the center (51 mm) and thin near the periphery (10 mm) such that forging with a flat platen resulted in regions of high strain (center) and low strain
As a result of interacting with the laser beam during ejection, laser spatter particles differ from the base powder morphologically, chemically, and microstructurally. Studying 316 L stainless steel, Al-Si10-Mg, and Ti-6Al-4 V laser spatter, Simonelli et al. [16] found that the ejected particles are much larger than the base powder and also contain …
This study examined the early stages of tarnishing of American Iron Steel Institute (AISI) 304L austenitic stainless steel (SS) condenser tubes in contact with running freshwater from the Tagus River in Spain. The immersion time of the tubes was 569 days. Tarnishing originated by biofouling was assessed using electrochemical impedance …
بانک اطلاعات اموال مواد فولادی | فولاد جی اف اس.AISI-304L، مواد فولادی و راه حل های ماشینکاری فولاد برای صنعت فولاد. با بیش از 47 سال موفقیت در صنعت فولاد ویژه که تامین کننده پیشرو مواد فولادی ویژه در تایوان است، گسترش یافته است.
• Grade 304L is the low carbon version of 304, and although the two types share many of the same properties, it is the differences in carbon content that differentiates them. It does not require post-weld annealing to effectively maximize corrosion resistance and so is extensively used in heavy gauge components (over about 6mm).
In the work, experiments were carried out on Austenitic Stainless Steel (AISI 304L) using Tungsten inert gas (TIG) welding process. In this study Butt welded joints have been made by using three levels of current, gas flow rate and nozzle to work piece distance.
Fig. 1 a shows X-ray profiles for the as-received AISI 304L and samples of AISI 304L milled for 1, 5, 10, 15, 20 and 25 h. Microstructure of the ball-milled specimens consists of a mixture of austenite [γ-phase, face-centred cubic (FCC)] and martensite [α´-phase, body-centred tetragonal (BCT)].
This article will introduce the differences between 304 and 304L stainless steel (304 vs 304L) from chemical composition, mechanical properties, corrosion resistance and weldability. AISI 304L stainless steel is an ultra-low carbon version of SS 304 (Carbon content: ≤ 0.08 %). "L" is short for "Low carbon" and the maximum carbon
ACERO TUBO S.A. de C.V. Proporcionan una amplia gama de tubos y tuberías Austeníticas SS 304L en tubería sin soldadura ASTM A312, tubería sin soldadura ASTM A213, tubería soldada ASME SA 312 de acero ASTM SA 312, tubería soldada ASTM A249