15-5PH is a stainless, martensitic, and hardenable Cr-Ni-Cu Steel with high strength and ductility as well as good weldability and forgeability. Typical ˜elds of application are in medical, automotive, and aerospace areas. Through solution annealing occurs. 15-5PH
Technical Data Sheet. Alloy 15-5 is a precipitation hardening alloy exhibiting high strength and hardness with moderate corrosion resistance. Alloy 15-5 is a variant of the older 17-4 and 15-5 was designed to have greater toughness than S17400, especially in the through-thickness (short transverse) direction. Alloy 15-5 is used in applications
15-5 PH se usa si las propiedades mecánicas y la resistencia a la corrosión de los aceros martensíticos son insuficientes. 15-5 PH está disponible en las ejecuciones H1100 y H1150: H1100: resistencia a la tracción Rm: 965-1160 N / mm²; Rp0.2 min. 795 N / mm²; A4 min. 14% de muestra longitudinal; Z min. 45% de muestra longitudinal; Kv a -30 ° C min. 34 joule
بررسی استحکام و دوام باند یک ادهزیو جدید به عاج سطحی دندان با دو روش Etch and rinse و Self-etch : مطالعه آزمایشگاهی دکتر صفا منافی۱- دکتر علی اسکندری زاده۲- دکتر نیلوفر شادمان۲– دکتر مریم مفیدی۱- دکتر مونا نوروزی۳ ۱- استادیار گروه
All of the additive 15-5PH material was deposited with the parameters outlined in Table 2.The laser power was decreased by 200 W per deposited layer until the laser power was 1000 W, where it was held constant until the build was complete. The parameters on Table 2 were optimised for the specific powder distributions running a …